Skip to content

Hubert / sun-fire-v890-psu-pinout

Go to a project
Commit d09b7a91 by berezowski
Options

Update README.md

1 parent 391ae836
Inline Side-by-side
Showing with 13 additions and 0 deletions
README.md
...@@ -2,6 +2,9 @@ sun-fire-v890-psu-pinout ...@@ -2,6 +2,9 @@ sun-fire-v890-psu-pinout
======================== ========================
| OFF | | | | | B1 | | Pins | x1 | x2 | x3 | x4 | x5 | x6 | | A1 | | | | OFF | | | | | B1 | | Pins | x1 | x2 | x3 | x4 | x5 | x6 | | A1 | | |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| | | | | | | | y1 | 0 | GND | 0 | 4.8 | 0 | 6.05| | | | | | | | | | | | | y1 | 0 | GND | 0 | 4.8 | 0 | 6.05| | | | |
...@@ -20,3 +23,13 @@ To start the Power Supply shorten Pins x4y1 to GND and x3y3 to GND. ...@@ -20,3 +23,13 @@ To start the Power Supply shorten Pins x4y1 to GND and x3y3 to GND.
| | | | | | | | y3 | GND | 3.37 | 0| GND |5.11 | 5.11| | | | | | | | | | | | | y3 | GND | 3.37 | 0| GND |5.11 | 5.11| | | | |
| | | | | | | | y4 | 0 | 0.15 | 0.06| 0.7 | GND | 5.14 | | | | | | | | | | | | | y4 | 0 | 0.15 | 0.06| 0.7 | GND | 5.14 | | | | |
### Reprap Ramps ###
Connection of the Powersupply to your Reprap Ramps Shield
* x3y3 -> Ramps PS-ON
* x4y3 -> x3y1
* x5y3 -> Ramps VCC
* x6y3 -> Ramps 5V
Markdown is supported
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!